E-11 ESB + BLastFX
Project: E-11 ESB + BLASTFX
https://www.3d-props.com/blasters/e-11-types/e-11-esb/
Scale: 1:1
3D Printed,
CR-10 V2, PLA
Anycubic Photon S Resin printer
BlastFX from TRamp
https://www.facebook.com/trooperamp
Design credits: Skylu 3D Props
https://www.facebook.com/Skylu3D
https://www.patreon.com/skylu3dprops/
We wil guide you step by step in the process of building this blaster.
You can find the files in the Patreon file shop or get yourself a KIT in the regular shop.
If you have any questions feel free to send us a message on Facebook or Patreon or by mail.
SETTING UP THE PRINTER SETTINGS FOR MOST PARTS
Some printing progress 16-11-2020
REMOVING THE PRINTERLINES
ADDING THE T-TRACKS TO THE BARREL + MAG SCREW
BLASTFX INSTALLATION
Note from Paul Whitrow:
You can't just snip a display off a You can't just snip a display off a profile that would normally have it turned on, you need to explicitly set the non required display to "NO" in the profile
for your chosen weapon. Otherwise it will severely slow down the system as it gets stuck trying to drive a missing display.
POWER MODULE INSTALLATION CR-123A
SCOPE DISPLAY
HP LED AND LASER
HANDLE CONFIGURATION SWITCH AND TRIGGER
After assembling and installing BlastFX, I re-sprayed the blaster with black and added a final layer of varnish. The weathering was done after that.
I will highlight this process in an other project soon.
