Project: DL-21
https://www.3d-props.com/blasters/dl-21/

Scale: 1:1
3D Printed, MONO X RESIN

https://starwars.fandom.com/wiki/DL-21_blaster_pistol

You need a: 15mm tube

Design credits: Skylu 3D

We wil guide you step by step in the process of building this blaster.
You can find the KIT in the regular shop.
If you have any questions feel free to send us a message on Facebook or Patreon or by mail.

For this build you need:

A metal tube 15mm x 300mm
8x M3 cylindrical 8mm (scope mounts ring screws)
4x M4 screws x 12mm for assembling the scope rail to the upper receiver and the magazine section.
2x M4 bolhead x 8mm screws for the grip
1x M4 headless screw 15mm for the trigger or a 3.5mm pin/dowel 15mm
1 M4 x 12mm headless screw to create a hook for the rubber band